Your Cart: item(s)<< Prev Showing: 91-95 of 113 Next >>
· 66-70 · 71-75 · 76-80 · 81-85 · 86-90 · 91-95 · 96-100 · 101-105 · 106-110 · 111-115 ·
(See attached file for full problem description)
Subject:
Mechanical and Materials Engineering
Topic:
Fluid Mechanics
Posting ID:
79344
OTA ID:
102804
(See attached file for full problem description)
Subject:
Mechanical and Materials Engineering
Topic:
Fluid Mechanics
Posting ID:
79350
OTA ID:
102804
Fluid Mechanics - Modeling, dimensional analysis, scale up and similitude test
An airplane scale model is to be tested. The problem of interest is one in which the landing behavior is to be tested. Since this is a low speed problem, ... See attached file for full problem description.
Subject:
Mechanical and Materials Engineering
Topic:
Fluid Mechanics
Posting ID:
80754
OTA ID:
103992
Two flat, rectangular plates with a lateral dimension
Two flat, rectangular plates with a lateral dimension w*l lie parallel, one above the other, a distance h apart. The gap between them is filled with molten polymer. One plate is fixed; the other moves parallel to it in the direction of the dimension l at velocity v, causing the fluid to be sheared. Show that the fluid is displaced past the stationary plate with a volume flow rate Q given by: Q =vhw/2
Subject:
Mechanical and Materials Engineering
Topic:
Fluid Mechanics
Posting ID:
82440
OTA ID:
103992
(See attached file for full problem description)
Subject:
Mechanical and Materials Engineering
Topic:
Fluid Mechanics
Posting ID:
93412
OTA ID:
103997
<< Prev Showing: 91-95 of 113 Next >>
· 1-5 · 6-10 · 11-15 · 16-20 · 21-25 · 26-30 · 31-35 · 36-40 · 41-45 · 46-50 · 51-55 · 56-60 · 61-65 · 66-70 · 71-75 · 76-80 · 81-85 · 86-90 · 91-95 · 96-100 · 101-105 · 106-110 · 111-113 ·Page generated in 0.0131 seconds