CURRENT FLOW

See attached. How much current flows through the 1k ohm resistor in parallel with the current source?

Transfer function

Can you help me find the transfer function IL/Vs?See attached.

Logic

Can you confirm-The outputs of two"NAND" gates are connected to the inputs of an "EXCLUSIVE OR" gate.Each of the "NAND" gates has one input at logic high level and the other input at low logic level.What is the output of the "EXCLUSIVE OR" gate? I say 0 would be the output...am I correct?

Electrical circuit course

Design a Circuit diagram and design calculations for part A: A) Design a voltage-divider circuit for a 15-V regulated power supply. The circuit must feed a 3-mA load at 9-V. Draw a circuit diagram showing the values of all components and the significant voltages and currents throughout the circuit. Your circuit should include an SPST switch for turning power to the circuit on and off. Present your design in a neat organized report, listing all component required, show all calculations leading to your design components. • Calculate the values of the resistors that are to be used in the circuit. • Consider the 9-V voltage drop in the circuit and the circuit must feed a 3-mA load. Fo... click for more

Electrical and electronic principles

Complex numbers. An ac scource consists of a voltage generator and three impedances connected in a curcuit shown attached 3+j6 5-j2 ///------------///------------- | | | ///-j10---- | | 200v | ----------------------------------------- use suitable network theorems to find equvalent cuircuits which consist of :- A) a voltage source in series with an impedance B) a current source in parallel with an admittance if a load of impedance 4-j5 is connected across the output terminals, calculate the current flowing in the load. find the ... click for more